
HCPL-3020/HCPL-0302
0.4 Amp Output Current IGBT Gate Drive Optocoupler
Description
The HCPL-3020 and HCPL-0302 consist of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate-controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving small or medium power IGBTs. For IGBTs with higher ratings, the HCPL-0314/3140 (0.6 A), HCPL-3150 (0.6 A) or HCPL-3120 (2.5 A) gate drive opto-couplers can be used.
Features
• 0.4 A maximum peak output current
• 0.2 A minimum peak output current
• High speed response: 0.7 µs maximum propagation delay over temperature range
• Ultra high CMR: minimum 10 kV/µs at VCM = 1000 V
• Bootstrappable supply current: maximum 3 mA
• Wide operating temperature range: –40°C to 100°C
• Wide VCC operating range: 10 V to 30 V over temperature range
• Available in DIP 8 and SO-8 packages
• Safety approvals: UL approval, 3750 VRMS for 1 minute
• CSA approval
• IEC/EN/DIN EN 60747-5-2 approval
VIORM = 630 VPEAK (HCPL-3020),
VIORM = 566 VPEAK (HCPL-0302)
Applications
• Isolated IGBT/power MOSFET gate drive
• AC and brushless DC motor drives
• Industrial inverters
• Air conditioner
• Washing machine
• Induction heater for cooker
• Switching power supplies (SPS)
Functional Diagram
Absolute Maximum Ratings
Parameter | Symbol | Min. | Max. | Units | Note |
---|---|---|---|---|---|
Storage Temperature | TS | -55 | 125 | °C | |
Operating Temperature | TA | -40 | 100 | °C | |
Average Input Current | IF(AVG) | 20 | mA | 1 | |
Peak Transient Input Current (<1 µs pulse width, 300 pps) | IF(TRAN) | 1.0 | A | ||
Reverse Input Voltage | VR | 5 | V | ||
“High” Peak Output Current | IOH(PEAK) | 0.4 | A | 2 | |
“Low” Peak Output Current | IOL(PEAK) | 0.4 | A | 2 | |
Supply Voltage | VCC – VEE | –0.5 | 35 | V | |
Output Voltage | VO(PEAK) | –0.5 | VCC | V | |
Output Power Dissipation | PO | 250 | mW | 3 | |
Input Power Dissipation | PI | 45 | mW | 4 | |
Lead Solder Temperature | 260°C for 10 sec., 1.6 mm below seating plane | ||||
Solder Reflow Temperature Profile | See Package Outline Drawings section |
Notes:
1. Derate linearly above 70°C free air temperature at a rate of 0.3 mA/°C.
2. Maximum pulse width = 10 µs, maximum duty cycle = 0.2%. This value is intended to allow for component tolerances for designs with IO peak minimum = 0.2 A. See Application section for additional details on limiting IOL peak.
3. Derate linearly above 85°C, free air temperature at the rate of 4.0 mW/°C.
4. Input power dissipation does not require derating.
Stock Offer (Hot Sell)
Part No. | Quantity | Brand | D/C | Package |
VND5E050AKTR-E | 3314 | ST | 15+ | SSOP-24 |
VND5N07 | 7988 | ST | 13+ | TO-252 |
VS1003B-L | 4658 | VLSI | 16+ | QFP48 |
VS1063A-L | 1844 | VLSI | 16+ | LQFP-48 |
VS-10MQ100NPBF | 93000 | VISHAY | 15+ | SMA |
VS-6CWQ06FNPBF | 13207 | VISHAY | 13+ | TO-252 |
VSLB3940 | 15550 | VISHAY | 10+ | DIP-2 |
W25Q128FVFG | 17585 | WINBOND | 15+ | SOP-16 |
W25Q128FVPIQ | 17798 | WINBOND | 16+ | WSON-8 |
W25Q16DVSSIG | 6761 | WINBOND | 16+ | SOP-8 |
W25Q256FVFIG | 11408 | WINBOND | 13+ | SOP-16 |
W25X10CLUXIG | 15621 | WINBOND | 14+ | USON8 |
W25X40BVSNIG | 44000 | WINBOND | 12+ | SOP-8 |
W25X40CLSNIG | 5543 | WINBOND | 16+ | SOP-8 |
W27C010-70Z | 4624 | WINBOND | 13+ | DIP-32 |
W5300 | 2858 | WIZNET | 16+ | LQFP-100 |
W78E516B40DL | 11479 | WINBOND | 13+ | DIP-40 |
WD37C65CJM | 4872 | WDC | 16+ | PLCC44 |
WF19054 | 4823 | WINBOND | 01+ | DIP-40 |
WS6264LLPG-70 | 3285 | WINGSHING | 13+ | DIP-28 |
X2444P | 7795 | XICOR | 11+ | DIP-8 |
X28C256P-15 | 6438 | XICOR | 14+ | DIP-28 |
X28HC64JI-12 | 7780 | XICOR | 14+ | PLCC32 |
X5043PIZ | 4354 | INTERSIL | 16+ | DIP-8 |
X9C103PIZ | 3597 | INTERSIL | 16+ | DIP-8 |
X9C104SIZ | 4793 | INTERSIL | 16+ | SOP-8 |
XC2C64A-7VQG44C | 2618 | XILINX | 12+ | QFP |
XC3S200AN-4FT256C | 2632 | XILINX | 15+ | BGA |
XC3S250E-4PQG208C | 2837 | XILINX | 15+ | QFP208 |
XC3S500E-4PQG208C | 1903 | XILINX | 15+ | QFP208 |
Anterwell Technology Ltd.
King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and electronic products import and export business. Currently, we have branches in Hong Kong and Malaysia.
Up to now. ANTERWELL have more than 1,000,000 types of electronic components in stock. ANTERWELL has become one of the top choices for purchasing IC chips both domestically and internationally. King is a senior IC chip expert, sales engineer, and mentor, leading an elite team with customer first, quality first, honesty, trustworthiness, and mutual benefit. We look forward to cooperate with you to create a better future!
ANTERWELL’s main products include semiconductors, resistors, capacitors, diodes, inductors, connectors, transistors, sensors, etc. Involving the major well-known brands such like: TI, XILINX, FAIRCHILD, STM, MICRON, MICROCHIP, TDK, SAMSUNG, ON, NXP,IR,ADI, ATMEL,VISHAY,LINEAR etc.
ANTERWELL adheres to the development concept and purpose of "direct stock offer, excellent quality, favorable price, and sincere service", which is deeply recognized by domestic and foreign customers. Based on the long-term development goal, ANTERWELL provides customers with standardized, professional, and diversified high-quality services through a strong market service network. ANTEWRELL has multiple skilled and capable executives with a professional QC team and excellent sales team to win the high support and trust of the vast customer base! We provide the best quality, price and service.
ANTERWELL will be your best Partner.