
MEANWELL CEN-60 60W 12V Single Output LED Power Supply LED Driver
Features :
♦ Universal AC input / Full range (up to 295VAC)
♦ Protections: Short circuit / / Over voltage / Over temperature
♦ Output voltage and constant current level adjustable
♦ Built-in active PFC function
♦ IP66 design for indoor or outdoor installations
♦ Class 2 power unit
♦ Cooling by free air convection
♦ 100% full load burn-in test
♦ High reliability
♦ Suitable for LED lighting and moving sign applications
♦ Compliance to worldwide safety regulations for lighting
♦ Suitable for dry / damp / wet locations
♦ 3 years warranty
Specifications:
♦ 60w waterproof led driver
♦ Original Meanwell
♦ Prompt Delivery: 3~5 days
♦ Good Price High Quality
♦ 3 years warranty
MODEL | CEN-60-12 | |||
OUTPUT | DC VOLTAGE | 12V | ||
CONSTANT CURRENT OPERATION VOLTAGE Note.5 | 9 ~ 12V | |||
CURRENT RANGE | 0 ~ 5A | |||
RATED CURRENT | 5A | |||
RATED POWER | 60W | |||
RIPPLE & NOISE (max.) Note.2 | 2Vp-p | |||
VOLTAGE ADJ. RANGE | 10.8~13.5V | |||
VOLTAGE ADJ. RANGE | 3.75 ~ 5A | |||
VOLTAGE TOLERANCENote.3 | 10% | |||
LINE REGULATION | 3.0% | |||
LOAD REGULATION | 5.0% | |||
SETUP, RISE TIME | 1400ms / 230VAC 2800ms / 115VAC at full load | |||
INPUT | VOLTAGE RANGE | 90 ~ 295VAC 127 ~ 417VDC | ||
FREQUENCY RANGE | 47 ~ 63Hz | |||
POWER FACTOR | PF 0.9 at 75 ~ 100% load, 115VAC / 230VAC ; PF>0.97 / 115VAC PF>0.95 / 230VAC at full load | |||
EFFICIENCY (Typ.) | 86% | |||
AC CURRENT (Typ.) | 0.8A/115VAC 0.4A/230VAC | |||
INRUSH CURRENT (Typ.) | 45A/230VAC | |||
LEAKAGE CURRENT | <0.75mA / 240VAC | |||
PROTECTION | OVER CURRENT | 95 ~ 110% | ||
Protection type : Constant current limiting, recovers automatically after fault condition is removed | ||||
SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed | |||
OVER VOLTAGE | 14.5~ 17V | |||
Protection type : Shut down o/p voltage, re-power on to recover | ||||
OVER TEMPERATURE | 85 10 (RTH1) | |||
Protection type : Shut down o/p voltage, re-power on to recover | ||||
ENVIRONMENT | WORKING TEMP. | -30 ~ +70°C (Refer to output load derating curve) | ||
WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |||
STORAGE TEMP., HUMIDITY | -40 ~ +80 , 10 ~ 95% RH | |||
TEMP. COEFFICIENT | 0.03%/ (0 ~ 50 ) | |||
VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for? 72min. each along X, Y, Z axes | |||
SAFETY &EMC(Note 4) | SAFETY STANDARDS | UL8750, TUV EN61347-1, EN61347-2-13, IP66 approved | ||
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | |||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG: >100M Ohms / 500VDC / 25 / 70% RH | |||
EMI CONDUCTION & RADIATION | Compliance to EN55015 | |||
HARMONIC CURRENT | Compliance to EN61000-3-2 Class C ( 75% load) ; EN61000-3-3 | |||
EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level (surge 4KV),? criteria A | |||
OTHERS | MTBF | 523.4Khrs min. MIL-HDBK-217F (25 ) | ||
DIMENSION | 183*62.5*40.5mm (L*W*H) | |||
PACKING | 0.56Kg;24pcs/14.4Kg/1.11CUFT | |||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Direct connecting to LEDs is not suggested for models with RIPPLE & NOISE > 10% and using additional drivers is highly recommended. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. Constant current operation region is within 65% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. |
Our Services
1. Samples offer quicky.
2. Customized are welcomed.
3. No MOQ.
4. Good post-sale service and technical support
5. Shipping by DHL FEDEX UPS
FAQ
Q1. Can I have a sample order for LED driver?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for LED driver?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5: Do you offer guarantee for the products?
A: Yes, we offer 3-7 years warranty to MeanWell dirver.
Q6: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control
system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new one.
Phenson Lighting Tech.,Ltd
Phenson Lighting Tech.,Ltd (深圳市芬森照明科技有限公司)is a professional manufacturer and provider of various LED lighting products since established in 2003, owns a factory of 6000 square meters with high qualified clear workshops and locate in Shenzhen with 100 staff members,Combining the R&D team(20 engineers), manufacture department and sale&after-sales service team. Phenson factory equiped with advanced automatical Die Bonding&Chip Bonding equipments, SMT machine and molding machines; perfect quality-testing including aging test and safeguard measures; all of these prompt phenson to be the leader in production.we are mainly engaged in scientific research and develop LED newness with advanced technologies. The products produced by Phenson cover interior and exterior LED lighting which widely used in residential, commercial, architectural and industrial lighting.
To supply more innovated design is our goal, we have strong R&D team who are professional and have abundant experience in the areas of technical design, electronics, structure and illumination, most of our products are self-designed with private moulds, also we have passionate person to search sources to meet current market demands, with all our excellent experience and service in this field, we trust Phenson can give more great LED lighting solutions to our customers.As a professional LED Lighting manufacturer, Phenson Invested more than 10% funds of the turnover in R&D, providing users with one-on-one personalized service. Our product have passed UL, CE, EMC, LVD,
ISO9001:2008 & RoHS certifications and sell well in China and
are exported to Europe, America, Asia and other areas. We produce a
wide variety of products which were highly praised and well
accepted by customers.
As a LED light supplier, we mainly focus on Europe and North
America market at present, as the development and requirement of
LEDs, we would like to have more our customers present LED lighting
products in more potential markets based on our efforts.
Feeling Charming of the Light, looking for value of the Light. Our
philosophy is " technique as the best,
quality as the first, to be honest to business, to improve
constantly". We keep learning and studying to do our
best to be your reliable partner in the world. Join us, let’s grow
together.
we have to remind our clients ,our bank account is Phenson Lighting Tech.,Ltd .
Our excellent sales are always at your service. Phenson, lighting
up the future!