
Meanwell LRS-350-12 Single Output DC Switching Power Supply LED
Driver
Technical features
Model | LRS-350-12 |
Rated Power | 350W 12v 30a power supply |
Input Voltage | 85-264VAC |
Output Voltage | 12VDC (+-10% can be adjust) |
Protection | Over load,Over voltage, short circuit... |
Certification | CB UL |
AC input range selectable by switch
Withstand 300VAC surge input for 5 second
Protections: Short circuit / Overload / Over voltage/ Over temperature
Forced air cooling by bulit-in DC fan
Built-in cooling Fan ON-OFF control
LED indicator for power on
100% full load burn-in test
High operating temperature up to 70℃
High efficiency, long life and high reliability
3 years warranty
Specifications
SPECIFICATION | ||||||||||||||||
OUTPUT | ||||||||||||||||
Model | LRS-350-3.3 | LRS-350-5 | LRS-350-12 | LRS-350-15 | LRS-350-24 | LRS-350-36 | LRS-350-48 | |||||||||
DC Voltage | 3.3V | 5V | 12V | 15V | 24V | 36V | 48V | |||||||||
Rated Current | 60A | 60A | 29A | 23.2A | 14.6A | 9.7A | 7.3A | |||||||||
Current Range | 0~60A | 0~60A | 0~29A | 0~23.2A | 0~14.6A | 0~9.7A | 0~7.3A | |||||||||
Rated Power | 198W | 300W | 348W | 348W | 350.4W | 349.2W | 350.4W | |||||||||
Ripple & Noise | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 200mVp-p | |||||||||
Voltage Adj. Range | 2.97~3.6V | 4.5 ~ 5.5V | 10~ 13.8V | 13.5~18V | 21.6~28.8V | 32.4~39.6V | 43.2~52.8V | |||||||||
Voltage Tolerance | ±4.0% | ±3.0% | ±1.5% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |||||||||
Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||||||||
Load Regulation | ±2.5% | ±2.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||||||||
Setup, Rise Time | 1300ms, 50ms/230VAC 1300ms, 50ms/115VAC at full load | |||||||||||||||
Hold Up Time | 16ms/230VAC 12ms/115VAC at full load | |||||||||||||||
INPUT | ||||||||||||||||
Voltage Range | 90 ~ 132VAC / 180 ~ 264VAC selected by switch 254 ~ 370VDC (switch on 230VAC) | |||||||||||||||
Frequency Range | 47 ~ 63Hz | |||||||||||||||
Efficiency | 79.5% | 83.5% | 85% | 86% | 88% | 88.5% | 89% | |||||||||
AC Current | 6.8A/115VAC 3.4A/230VAC | |||||||||||||||
Inrush Current | 60A/115VAC 60A/230VAC | |||||||||||||||
Leakage Current | <2mA / 240VAC | |||||||||||||||
PROTECTION | ||||||||||||||||
Over Load | 110 ~ 140% rated output power | |||||||||||||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||||||||||||
Over Voltage | 3.8~4.45V | 5.75~6.75V | 13.8 ~ 16.2V | 18~21V | 28.8 ~ 33.6V | 41.4~46.8V | 55.2~ 64.8V | |||||||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||||||||||||
Over temperature | Hiccup mode, recovers automatically after fault condition is removed | |||||||||||||||
ENVIRONMENT | ||||||||||||||||
Working Temp. | -20 ~ +70℃ (Refer to “derating curve”) | |||||||||||||||
Working Humidity | 20 ~ 90% RH non-condensing | |||||||||||||||
Storage Temp., Humidity | -40 ~ +85℃, 10 ~ 95% RH | |||||||||||||||
Temp. Coefficient | ±0.03%/℃ (0 ~ 50℃) | |||||||||||||||
Vibration | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes | |||||||||||||||
SAFETY | ||||||||||||||||
Safety Standards | UL60950-1 approved | |||||||||||||||
Withstand Voltage | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||||||||||||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH | |||||||||||||||
OTHERS | ||||||||||||||||
Dimension | 215*115*30mm (L*W*H) | |||||||||||||||
Weight | 0.76Kg | |||||||||||||||
Packing | 15pcs/carton/12.4kg/0.78CUFT | |||||||||||||||
NOTE | ||||||||||||||||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. |
Detailed image
Power Supply FAQ
How do you select suitable MeanWell power supplies and 12v 30a power supply?
A. Select suitable wattage based on customer’s system requirements
and application methods. Must also take excess power and driving
method into consideration.12v 30a power supply
B. Based on LED power supply’s operating environment select
suitable IP level and mechanical type (metal enclosure, plastic
enclosure, and open frame PCB) for that environment.
C. Is PFC function required or not? Single stage PFC is only
suitable for LED load. Dual stage PFC is suitable for general
applications.12v 30a power supply.12v 30a power supply
D. If LED system is based on direct drive, units with adjustable
voltage and current should be considered for flexibility in
changing voltage/current levels. Dimming function may also come in
handy when LED brightness control is preferred.
Phenson Lighting Tech.,Ltd
Phenson Lighting Tech.,Ltd (深圳市芬森照明科技有限公司)is a professional manufacturer and provider of various LED lighting products since established in 2003, owns a factory of 6000 square meters with high qualified clear workshops and locate in Shenzhen with 100 staff members,Combining the R&D team(20 engineers), manufacture department and sale&after-sales service team. Phenson factory equiped with advanced automatical Die Bonding&Chip Bonding equipments, SMT machine and molding machines; perfect quality-testing including aging test and safeguard measures; all of these prompt phenson to be the leader in production.we are mainly engaged in scientific research and develop LED newness with advanced technologies. The products produced by Phenson cover interior and exterior LED lighting which widely used in residential, commercial, architectural and industrial lighting.
To supply more innovated design is our goal, we have strong R&D team who are professional and have abundant experience in the areas of technical design, electronics, structure and illumination, most of our products are self-designed with private moulds, also we have passionate person to search sources to meet current market demands, with all our excellent experience and service in this field, we trust Phenson can give more great LED lighting solutions to our customers.As a professional LED Lighting manufacturer, Phenson Invested more than 10% funds of the turnover in R&D, providing users with one-on-one personalized service. Our product have passed UL, CE, EMC, LVD,
ISO9001:2008 & RoHS certifications and sell well in China and
are exported to Europe, America, Asia and other areas. We produce a
wide variety of products which were highly praised and well
accepted by customers.
As a LED light supplier, we mainly focus on Europe and North
America market at present, as the development and requirement of
LEDs, we would like to have more our customers present LED lighting
products in more potential markets based on our efforts.
Feeling Charming of the Light, looking for value of the Light. Our
philosophy is " technique as the best,
quality as the first, to be honest to business, to improve
constantly". We keep learning and studying to do our
best to be your reliable partner in the world. Join us, let’s grow
together.
we have to remind our clients ,our bank account is Phenson Lighting Tech.,Ltd .
Our excellent sales are always at your service. Phenson, lighting
up the future!