Step Up Boost Converter Power Supply Arduino Sensor Module 100W LTC1871 DC To DC

Description

The module has high power output and efficiency (up to 96%). The output can be up to 65W (and can further reach 100W when enhance heat-transfer).
Onboard we have a voltmeter to show clearly the input / output voltage (we can select to show input/output voltage by pressing on the button onboard). When the "IN" LED lights on, the voltmeter displays input voltage; When the "OUT" LED lights on, the voltmeter displays output voltage.

You can easily adjust voltage by the potentiometer onboard and the voltmeter onboard. You won't even need a multi-meter when adjusting. Very convenient.

This display part adopts advanced voltage meter microprocessor,boosting part adopts American imported boost controller,
through the use of the power MOSFET on resistance and save the current detecting resistor, maximizing it efficiency to 96.4%.
Import the big power MOS low resistance pipe, large package, high current, high efficiency Schottky, super wide thickened wire
of PCB low temperature rise, high power and high efficiency.Ultra wide working voltage,when the input and output voltage is above
20V it can be up to 128W of output power.Long life type switching power supply special high frequency high capacity and low
resistance (low ESR) aluminum electrolytic capacitor to lower output ripple. Module chip used are imported materials, stable performance.
This module is a more intelligent, humane, high cost performance module.

Specification

1.Input Voltage:3-35V DC (Note: When input voltage is less than 4V, onboard voltmeter will not work).
2.Input Current:9A (max).
3.Output Voltage:3.5-35V DC (this board is boosting board, output voltage>=Input voltage).
4.Output Current:6A (max).
5.Output Power: 65W (when the input and output voltage greater than 20V up to 100W).
6.Conversion Efficiency: 96% (the highest).
7.Output Ripple:40mV(TYP).
8.Onboard Voltmeter Range:4-40V .
9.Error:+/-0.1V.
10.Size:67.5mmx41.5mmx14mm/2.66"x1.63"x0.55"(inch) (approx).

Application range:

DIY a regulated power supply, input 5V can be, the output can be 5-35V adjustable.
To power your electronic device, you can set the output value according to your system voltage. For example, 3.7V lithium L 5V do mobile power, 7.4V or 12V to 19 liters of laptop power supply etc..
As a vehicular power supply, power your laptop, PDA, or digital products.

1 pc 100W LTC1871 DC To DC Step Up Boost Converter Power Supply Module

we also provide ODM service.

Competitive Advantage:
1.Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around The Globe.
4. High Quality With Global Standards.
5. 3 year factory warranty
6. Safe shipping way and payment

More Products:

	UNO R3 + breadboard 400 point + 9V battery snap Starter Learning Kit		HC-06 Bluetooth Wireless Module
	Mega 2560 R3 ( CH340G )		HC-SR501 Human body Pyroelectric Infrared sensor PIR
	DC 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Test Module		Ultrasonic Sensor HC-SR04
	LCD 1602 I2C module (Yellow Green light) ( Red board module)		20cm Male TO Female 40Pin Solderless Jumper Breadboard Wires

FAQ:
1. What is the delivery time?
Normally, 1-5 workdays after payment;
Special requirement orders, delivery time is negotiable.
2.If the products can’t work after receiving it,what should I do?
We will replace new items for you at once, and respect your final decision for wrong goods.
3.If the products don’t meet my demand after I received it,can I return it?
Yes,no problem.
You can return back to us, we will refund your full payment.

In 2009,We opened a subsidiary in Venezuela. In 2012,We became a member of the “shenzhen chamber of E-Commerce”. We look forward to your support and win-win cooperation.

We have been in the international trade field for more than 11 years. Our clients spread all over the world. We have gained sound reputation from our customers, as they acclaim that our products have top performance against price ratio.