Series Connection Residential Battery Storage Systems 12V150Ah 150A Discharge

Residential Battery Energy Storage 12V150Ah , 150 A Discharge , Series Connection

• 1. operate voltage range: 10~14.6V;
• 2. continuous charge current: ≤150A;
• 3. continuous discharge current: ≤150~200A;
• 4. pulse discharge current(3S): ≤500A;
• 5. short protection: 750A~1000A(150~500us);
• 6. Bluetooth or WIFI connection optional;
• 7. max. 4groups in series optional;
• 8. recommend max. 4 groups in parallel;
• 9. compatible with most inverters including Schneider SW series inverter, XW+ inverter, Magnum inverter, the Outback Radian inverter, SMA inverter, Victron inverter, etc

1. General Information

This specification defines the performance of rechargeable LiFePO4 battery pack TB-BL12150F-SC-S110A manufactured by SHENZHEN TOPBAND BATTERY CO., LTD, describes the type, performance, technical characteristics, warning and caution of the battery pack. The battery pack supports Bluetooth communication function. Through Android and IOS APP, it can read the battery status and information. Especially due to the Android system’s openness, different smartphone manufacturer will have their own different Bluetooth hardware version and customized feature Android systems. So the APP may not work well on some smartphones (with Android system) due to the compatible issue. It is necessary for the customer to confirm whether the phone is compatible with the APP.

2. Specification(@Battery initial Temp25±5℃)

3. Test Conditions

3.1 Standard Test Conditions

3.1.1 Unless otherwise specified, all performance tests are required conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.

3.1.2 Unless otherwise specified, the tested product is required unused within two months after outgoing.

3.2 Standard Charge Mode

"Standard Charge" means at 25±2℃ charge to limit voltage with 0.33C constant current, then charge with constant voltage until current less than 0.02C.

3.3 Quick Charge Mode

"Quick Charge" means at 25±2℃ charge to limit voltage with 1.0C constant current, then charge with constant voltage until current less than 0.02C.

3.4 Standard Discharge Mode

"Standard Discharge" means at 25±2℃ discharge to the cut-off voltage with0.33C current.

3.5 Quick Discharge Mode

"Quick Discharge" means discharging to the cut-off voltage with 1.0C current.

4. Product Performance

5. Protective circuit specification

The batteries are supplied with a LiFePO4 Battery Management System (BMS) that can monitor and optimize every single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.

6. Dimensional Drawing (Unit: mm)

7. Transportation

* Based on the character of cell, proper environment for transportation of LiFePO4 battery pack need to be created to protect the battery.

* Battery should stay in the warehouse 15℃～35℃ where is dry, clean, shade, and well-ventilated.

* The battery should be stored in 50% SOC during transportation.

* The battery needs to be charged every 6 months if out of use

* Keep the battery against dropping, turning over and serious stacking during loading.

8. Warning & Tips

Please read and follow the specification and caution remarks on battery surface before using the battery. Improper use may cause heat, fire, rupture, and damage or capacity deterioration of the battery. SHENZHEN TOPBAND BATTERY CO., LTD. Describes is not responsible for any accidents caused by the usage without following our specification.

² The battery must be far away from heat source, high voltage, and avoid to be exposed in sunshine for long time.

² Never throw the battery into water.

² Do not put the battery in a charger or equipment with wrong terminals connected.

² Never connect the positive and negative of battery with metal.

² Avoid excessive physical shock or vibration. don't hit, fall, stamp on the battery

² Without the permission of the manufacturer and guidance, forbidden to remove or to assemble the battery

² Do not use the battery mixed with another different manufacturer, type, or model batteries.

² Keep the battery against high temperature. Otherwise, it will cause battery heat, get into fire or lose some function and reduce the life.

² When battery run out of power, please charge your battery timely (≤15day).

² Please use the matched or suggested charger for this battery.

² If battery emits a peculiar smell, heating, distortion or appears any abnormity during working or storage, please stop using and take it out from the device.

² If the battery leaks and get into the eyes or skin, do not wipe, instead, rinse it with clean water and see doctor immediately.

² Please far away from children or pets.

² Do not put disuse battery into a fire or water.

² It supports max. 4groups in series connection.

² Parallel connection of this battery pack is allowed under the condition that voltage difference ≤0.2V, parallel numbers ≤4 groups, and operated by professionals.

9. Battery operation instruction

Charge and discharge

1. Charging current: Do not surpass the largest charging current that specification stipulated.

2. Charging voltage: Do not surpass the highest limited voltage that specification stipulated.

3. Charging temperature: Within temperature scope that specification stipulated.

4. Charge with constant current, then with the constant voltage, no reverse charge, which is dangerous1

5. Special note: Short time doesn't affect the use of the battery overcharge too, but for a long period of time over discharge or over charge can affect the function of the battery failure, or the battery can't use permanent, appear serious safety hazards, and need longtime floating please use the recommended floating model specification. Battery when not in use for a long time, because of its own self-discharge characteristics can also cause discharge, to prevent the occurrence of a discharge, the battery should maintain a certain capacity; maintain the voltage at 50% state of SOC.

10. Other Chemical Reaction

Because batteries utilize a chemical reaction, battery performance will deteriorate over time even if stored for a long period of time without being used. In addition, if the various usage conditions such as charge, discharge, ambient temperature, etc. are not maintained within the specified ranges, the life expectancy of the battery may be shortened or the device in which the battery is used may be damaged by electrolyte leakage. If the discharge time is much shorter than the normal after fully charged, even battery is charged correctly, and this may indicate it is time to change the battery.

Shenzhen Topband Co., Ltd. was registered in so-called “China Silicon Valley”, Shenzhen Hi-tech Industrial Park in 1996, and got listed in Shenzhen Stock Exchange ( the stock code as 002139) in 2007.

After years of rapid development, now Topband takes lithium battery as the core technology and has become one of the  leading suppliers of lithium battery solutions in China, focusing on nano lithium iron phosphate/ LiFePO4 technology for  EV, RV/ caravan, marine, motorcycle, golf cart / trolly, UPS, solar storage, medical, floor scrubber, industrial, commercial use, etc.

Topband has more than 5000 staffs, covers an area of 100,000 square meters. And large production plants are mainly located at Shenzhen and Huizhou

Our R&D team of over 300 professionals, in cooperation with Tsinghua Research Institute and Harbin Industrial University have laid a firm foundation of our leading technology.

We have got the certificates of  ISO9001, ISO14001, OHSAS18001, TS16949 and UL, CE, CB, UN38.3, TUV, etc.

Topband is a Hi-tech enterprise. Since the company established, with innovation, we have committed ourselves to making people’s lives more comfortable and high-efficient. We and our companions are working hard at making technology progress to let people enjoy the changes of new technology.