
Overview
The LNK-ET1100P Series product provides Ethernet Extension of 1-CH 10/100Base-TX over Twisted pair cable(400m max.). The products provide high power PoE (30W max Power Sourcing Equipment (PSE)) to the network camera. The products support PoW, hence, no power point is required for the transmitter and the network camera at the transmitter side. The product is good for retrofit of analog system by using the existing cable infrastructure.
Technical Indexes
Ethernet | |
Standards | IEEE802.3 10Base-T |
IEEE802.3u 100Base-TX | |
IEEE802.3af Power over Ethernet | |
IEEE802.3at Power over Ethernet | |
Connector | 1 × RJ45 |
Cabling | Cat5 or above |
Maximum Distance | 100m |
Shielded Twisted Pair | |
Cabling | Shielded Twisted Pair |
Connector | 2-pin terminal block |
Distance | Up to 400m@26AWG |
Data Rate | |
Downlink | 90Mbps (Max.) |
Uplink | 90Mbps (Max.) |
Technology | Power Line Communication (PLC) |
Electrical and Mechanical | |
Input Power | 48~57VDC (Terminal Block) or IEEE802.3at PD (for LNK-ET1100P-R only) |
Power Consumption | 8W Max. (PoW not in use) |
60W Max. (PoW in use) | |
Protection | |
Reverse Polarity | Present |
Power Input Overload | Present |
LED Indicators | |
Power | Power Status |
Ethernet | SPD, LINK/ACT, PoE (Transmitter) |
Shielded Twisted Pair | LINK (Transmitter) / READY (Receiver) / PoW (Receiver) / ACT |
PoE | |
Standard | IEEE802.3af/at |
Mode | B |
Port | RJ45 |
Max.Power | 25.5W Max. at RX (Powered Device) |
30W Max. at TX (Power sourcing Equipment) | |
Dimensions (W x D x H) | 114 × 82 × 31 mm |
Weight | 0.25kg |
Casing | Aluminum case |
Mounting Options | DIN-Rail or Wall Mount |
Environmental | |
Operation Temperature | -10°C to 60°C (14°F to 140°F) |
Storage Temperature | -40˚C to 85˚C (-40˚F to 185˚F) |
Relative Humidity | 5% to 90% non-condensing |
MTBF | > 100,000 hrs |
Regulatory Approvals | |
ISO9001 | |
FCC Part 15 Class A | |
EN55022 Class A | |
Surge Protection | |
RJ45: 1KV | |
BNC: 2KV | |
Power: 500V |
Features
· PoE+(30W) and Power over Shielded Twisted Pair
· 802.3af/802.3at Compliant
· Data Rate up to:90Mbps (Downlink), 90Mbps (Uplink)
· Max.Distance:400m over Shielded Twisted Pair Cable (26AWG)
· Accept 48~57VDC external power input or PoE power input from RJ45 port(Receiver side)
· Support DIN-Rail & Wall Mount installation
· -10°C to 60°C (14°F to 140°F) operating temperature
Warranty
· 3-Year Warranty
Typical Application
Power vs. Distance Chart
Test condition :
Telephone cable : MUST use twisted pair and 26AWG
Ethernet cable : Cat5e or Cat6
Twisted pair 26AWG Telephone Cable @ 27℃ | ||||
Telephone Cable Distance | Maximum Date Rate | PoL Output Power (Watts) | Telephone Cable Environment | Power Supply |
100 Meters | 100Mbps | 16W | Dispersed cable | 48VDC / 1.6A |
200 Meters | 100Mbps | 7W | Dispersed cable | 48VDC / 1.6A |
300 Meters | 98Mbps | 3.5W | Dispersed cable | 48VDC / 1.6A |
400 Meters | 30Mbps | 2W | Dispersed cable | 48VDC / 1.6A |
Ordering Information
Ethernet over UTP Extender with PoE | |
Model | Description |
LNK-ET1100P-T | Transmitter of 10/100Base-TX(PoE+) Ethernet Over Shielded Twisted Pair with PoW |
LNK-ET1100P-R | Receiver of 10/100Base-TX(PoE+) Ethernet Over Shielded Twisted Pair with PoW |
Mounting Options | ► Default DIN-Rail Bracket installed, Wall Mount Bracket is included. |
Power Options | ► 76.8W/1.6A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block |
► Power Supply is to be purchased separately |
E-link China Technology Co., Ltd.
Established in 2001& headquartered in Shenzhen, E-link China Technology Co., Ltd. (E-link) is a leading Fiber Optic Communication and CCTV Security Transmission product manufacturer in China. Our main products include active equipments including fiber media converters, CCTV fiber converters, CCTV over Ethernet Converters (HD-SDI over Ethernet, HDMI over Ethernet, Power over Ethernet), etc. With rich experience in providing high quality products in telecom and CCTV business, E-link has a large manufacturing base in Shenzhen, able to deliver cost-effective solutions to serve our customers successfully.
E-Link Quality:
• ISO9001 Quality System
• Full-Spectrum environment and electrical testing of all product design
• 48 hours aging test before delivery
• Qualified CE, RoHS, FCC
Since the launch of our products on the domestic market and international market, we have won a good reputation for our high quality products and sincere services. Our products are widely applied to network systems of Telecom, Radio and Television, Public Security, Bank ,ect. To be in line with different needs of different customers, we have people to trace the latest market information so as to keep our products competitive and vital.
Our knowledgeable sales, technical support and engineering staff are dedicated to understanding your requirements and designing products & solutions to meet your needs. We shall be pleased to provide you fiber optical network products with our best price, superior quality and fast delivery.